Results 1 to 10 of 83

Thread: My new-to-me 820s

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. #10
    Senior Hostboard Member wws944's Avatar
    Join Date
    March 16th, 2008
    Posts
    140
    Follows
    0
    Following
    0
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Quoted
    0 Post(s)

    Re: My new-to-me 820s

    I took a side panel off each one this morning. My uncle was right - they are both called 820Cs. Both have 802C/H-811 horns, 803A woofers, and N800D crossover. In the older one, the components are painted dark gray, and the newer one they are Altec green.

    Both have schematic diagrams on the interior of the side panel. On the older one, the drawing is dated 8/30/54 and is noted as "Issue 1" - which I would take to mean it is the first version of the 820C. On the newer one, the drawing was redone. It lists itself as "Issue 2" with a date of 2/31/55, but then also shows an 11/14/55 revision date as "Issue 3".

    The 803As on the older cabinet have a date code of "3-55" and have "20409" stamped on the cones. The newer 803As have a date code of "May 1957" and have "20750" stamped on the cones. (Looks like my uncle bought it in 1957, not 1956.) I didn't see any date codes on the 802Cs or the horns.

    Note in the photos that the crossover is mounted on the shelf on the earlier version, and next to the horn on the later version.
    Attached Images Attached Images
    Last edited by wws944; September 1st, 2012 at 05:23 PM.
    W.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
This forum has been viewed: 27889751 times.